Home Page Applications Products Contact Us
 
 

« Go back

ISOMAG ELECTROMAGNETIC FLOWMETERS

 
MS501 Microflow Sensor in Stainless Steel
1/8" through 3/4" sizes for flows from 0.04 gpm to 45 gpm. Handles pressures up to 230 PSIG. Stainless steel construction with PTFE lined flow tube. Temperatures up to 212F.
MS501 with ML4f1 Converter for High Speed Batching
1/8" through 3/4" sizes for flows from 0.04 gpm to 45 gpm. Handles pressures up to 230 PSIG. Stainless steel construction with PTFE lined flow tube. Temperatures up to 212F. Ideal for rapid filling, batching and dispensing.
MS600 Microflow Sensor in Polypropylene
1/8" through 3/4" sizes for flows from 0.03 to 50 gpm. Standard pressure is 230 PSI @ 70F. Polypropylene body and liner. Low cost, easy to install sensor with threaded NPT process fittings. temperatures up to 140F.
MS1000 Wafer Style Flow Sensor
1" through 16" sizes for flows from 2.45 to 20,698 gpm. Pressures to 580 PSI. Polypropylene, Ebonite or PTFE liner. Low cost, easy to install wafer mounting. Fluid temperatures up to 300F.
MS2420 Sanitary Electromagnetic Flow Sensor
1" through 4" sizes for flows from 2.4 to 1294 gpm - Standard pressure is 230PSI @ 70F. PTFE liner. Temperatures up to 300F. Tri-clamp fittings are perfect for food, beverage and pharmaceutical applications. Rated for 3A sanitary approval.
MS2500 Flange-Style Electromagnetic Flow Meter Sensor
1" through 48" sizes for flows from 2.4 to 179,400 gpm. Pressures to 5600 PSI @ 70F. Process temperatures up to 300F. Polypropylene, Ebonite or PTFE liner.
MS3780 Insertion Flowmeter
3" through 80" pipe diameters for flows from 66 gpm to 517,440 gpm - pressures to 580 PSI. Temperatures up to 300F. Insertion design can be installed and removed in non-pressurized lines.
CS3795 Insertion Flowmeter with Integral Converter
Integral converter runs on 18-30VDC. Suitable for up to 80" pipe diameters for flows from 66 gpm to 517,440 gpm - pressures to 230 PSI. Temperatures to 300F. Insertion design can be installed and removed in non-pressurized lines.
MS3810 Insertion Flow Meter with optional pressure transducer
Six sizes for pipe pipes from 3-300" diameter. Handles pressures to 360 PSI and temperatures up to 212F. Insertion design can be installed and removed in pressurized lines.
CS3820 Battery-Powered Insertion Flow Meter
Integral battery-powered converter with up to 15 year battery life. Suitable for up to 80" pipe diameters for flows from 66 gpm to 517,440 gpm - pressures to 360 PSI. Temperatures to 300F. Insertion design can be installed and removed in non-pressurized lines.
MS3900 Small Bore Electromagnetic Flow Meter
Small Bore Electromagnetic Flow Meter with Integral battery-powered converter. Suitable for flow control where flow might need to be controlled according to the temperature such as cooling systems on tooling machines, washing systems, etc.
CS8100 Compact Electromagnetic Flow Meter with integral display.
Suitable for flow measurement in liquids with a minimum conductivity of 20 µS/cm. Measuring accuracy ± 1% of reading. Housing in Noryl reinforced with 30% fiberglass, protection rate IP 67, max liquid temperature 185°F.
MS5000 Unique Low-Cost Corrosion Resistant Flow Meter with easy hose-clamp mount
The economical polyurethane MS5000 includes built-in o-ring seals and speedy "clamp-on" installation. The sensor can be equipped with a local or remote mounted converter.
GR Series Grounding Rings - Improves performance in lined or non-metallic pipes
Flomotion Systems GR Series grounding rings provide improved performance with electromagnetic flowmeters when used in lined or non-metalic piping systems by eliminating stray AC or DC electrical noise present in the fluids.